Driveways
Concrete Driveways in Winnipeg
If you need concrete driveways in Winnipeg built to outlast our winters, Concrete Winnipeg pours new driveways and fully replaces old ones in air-entrained 32 MPa concrete, reinforced with rebar and finished on schedule.

What's Included in Your Driveway
A concrete driveway in Winnipeg is only as good as the base under it and the mix on top of it. We take responsibility for the whole job, from excavation to the final walk-around with you. Every driveway includes accurate measurement and layout, excavation to a minimum of 12 to 15 inches, and a compacted granular base of 6 to 8 inches of three-quarter-down gravel, watered and packed so it will not settle.
We set proper heights and slope, build the forms, and lay 10 mm rebar on chairs to keep the steel in the middle of the slab. Where your new driveway meets existing concrete we drill and pin rebar so the two do not separate. Then we pour 5 to 5.5 inches of 32 MPa concrete, broom finish for grip, edge it, spray curing sealant, and saw-cut control joints no more than 10 feet apart to direct cracking below the surface.
Common Signs You Need This Service
- Wide or spreading cracks that catch water and grow every winter
- Sunken or heaved sections that pond water or trip you up
- Flaking, pitted, or scaling surfaces from years of road salt
- A crumbling city approach where the driveway meets the road
- Water running back toward your garage or foundation instead of to the street
Our Process
- Free estimate. We measure, discuss finish and slope, handle any City of Winnipeg approach permit, and give you a written price.
- Excavation and base. We remove the old driveway, dig to depth, then build and compact the granular base that prevents future heaving.
- Forming and rebar. We set heights and forms to slope water away from your home and lay rebar on chairs for reinforcement.
- Pour and finish. We place 32 MPa air-entrained concrete, broom finish, edge, and apply curing sealant the same day.
- Joints and cleanup. We saw-cut control joints, clean the site, and walk the finished driveway with you.
Finish and Material Options
Most Winnipeg driveways use a broom finish, which gives the best traction on snow and ice and hides everyday wear. For more curb appeal we also pour exposed aggregate driveways, which expose the natural stone for a durable, grippy surface, and coloured or stamped driveways that add pattern and tone. Every option uses the same structural 32 MPa base spec, so you choose appearance, not durability.
The mix matters. We use air-entrained concrete, which holds roughly 5 to 8 percent microscopic air voids that give freezing water room to expand. That single detail separates a surface that scales after a few winters from one that stays solid for decades.
Winnipeg Context
Winnipeg has one of the harshest freeze-thaw climates of any major Canadian city, with more than 180 days a year below freezing and frost that can drive several feet into the ground. That is why base preparation and the right mix matter so much here. A driveway poured on thin, poorly compacted gravel will heave and crack no matter how good it looks on day one. Our spec is built around Manitoba conditions, not a generic template.
What Affects Your Price
Pricing a driveway is variable because no two jobs are the same. The main factors are square footage, site access, the condition of the old base, whether a city approach permit is needed, the finish you choose, and the time of year. We give free written estimates so there are no surprises, and we are happy to help. A quality concrete driveway can last 30 years or more, which is why it remains one of the best-value surfaces you can put in front of a Winnipeg home.
Reviews
What Winnipeg Customers Say
“Our old driveway was cracked and heaving. Concrete Winnipeg tore it out, rebuilt the base and poured a new one in a few days. Two winters later it still looks perfect.”Dave M.River Heights
“Booked them for a garage pad and a walkway. Fair quote, showed up when they said, and cleaned up after. Exactly what you want from a contractor.”Sandra L.St. Vital
“We got a stamped concrete patio and it looks like natural stone for a fraction of the cost. Neighbours keep asking who did it.”Mark and Jen T.Charleswood
Frequently Asked Questions
How thick should a concrete driveway be in Winnipeg?
Residential driveways are poured at 5 to 5.5 inches of 32 MPa concrete over a compacted granular base of 6 to 8 inches. That thickness, combined with rebar, carries normal vehicle loads and resists frost movement through Manitoba winters.
How long before I can drive on a new concrete driveway?
Concrete reaches enough strength for foot traffic in about 24 hours and for vehicles in about 7 days. Full cure strength develops over 28 days. We give you clear timing when we finish the pour.
Do you handle the City of Winnipeg approach permit?
Yes. When your driveway ties into a city approach we take out the required City of Winnipeg permit and arrange the inspection. The approach is poured to city spec, typically 6 inches of concrete with dowels into the road.
Can you match my new driveway to existing concrete?
Yes. We drill and pin rebar into the existing slab so the new pour bonds to it, and we match finish and slope so the transition looks and drains right.
Ready to Get Started?
Get a free, no-obligation estimate from Winnipeg's trusted concrete crew.
Get a Free Estimateor call (204) 000-0000